|
 |
Replacement Parts for 244W Royale Round Post with Internal Wind
3202W Post Housing Assembly*. Redesigned and re-engineered to solve various problems inherent in the old winders in our 244W Internal Wind Round Tennis Posts as well as competitors’ similar internal winders. Improvements include:
- The post handle’s winder screw is now secured at its end to decrease the amount of play and make tightening the net a smoother operation.
- The gear wheel is now smaller, with longer cogs, and is held in place from both sides, decreasing the amount of play and thus wear to the gears.
- A wheel has been added to feed the tennis net cable and seat it properly onto the winder so it won’t lock up.
- All parts now use hardened steel. 6 lbs.
*Patent #7,201,677 |
|
Note: 244W round posts have had several different winder hole patterns over the years, and therefore it is possible when buying a replacement winder that your post’s winder holes may not match up with the 3202W WINDER HOLES. In this case, the post holes will need to be retapped. |
 |
3201W Post Cap with Pulley. Black or Green. 2 lbs.
3203W Round Galvanized Sleeves, 26". 20 lbs.
3204W Round Thick Wall PVC Sleeves, 26". 4 lbs.
3209W Post Crank Handle. 2 lbs.
3111W-3 Caps for Post Sleeves for 3” Round Post. Extra or Replacement. Sold as pair. 1/4 lb. |
3215W Post Cap without Pulley (deadhead). Black or Green. 2 lbs.
3216W Replacement Aluminum Round Sleeve Covers. 2 lbs.
3357W Post Collar for 3” Round Post. Extra or Replacement. Black or Green. 1/2 lb.
3447W Replacement Brass Screws for 3202W housing assembly |
|
 |
Replacement Parts for 245W Royale Square Post with Internal Wind (3" sq.)--ROUND CAP
Please note: We are no longer shipping 245W ROUND CAP posts in Black, only the new 245W FLAT CAP posts in Black. However, we do have stock in 245W ROUND CAP post in Green.
3212W Post Housing Assembly*. Redesigned and re-engineered to solve various problems inherent in the old winders in our 245W Internal Wind SquareTennis Posts as well as competitors’ similar internal winders. Improvements include:
- The post handle’s winder screw is now secured at its end to decrease the amount of play and make tightening the net a smoother operation.
- The gear wheel is now smaller, with longer cogs, and is held in place from both sides, decreasing the amount of play and thus wear to the gears.
- A wheel has been added to feed the tennis net cable and seat it properly onto the winder so it won’t lock up.
- All parts now use hardened steel. 6 lbs.
*Patent #7,201,677 |
 |
3112W Caps for Post Sleeves for 3" Square Post. Extra or Replacement. Sold as pair. 1/4 lb.
3209W Post Crank Handle. 2 lbs.
3211W Square Galvanized Sleeves. 20 lbs.
3213W Post Cap with Pulley. Black or Green. 4 lbs.
3214W Post Cap without Pulley (deadhead). Black or Green. 4 lbs. |
3217W Replacement Aluminum Square Sleeve Covers. 2 lbs.
3358W Post Collar for 3” Square Post. Extra or Replacement. Black or Green. 1/2 lb.
3447W Replacement Brass Screws for 3212W housing assembly |
  |
NEW Replacement Parts for 245W Royale Square Post with Internal Wind (3" sq.)--FLAT CAP
Please note: We are only shipping the new 245W FLAT CAP posts in Black. However, we do have stock in 245W ROUND CAP post in Green.
3297W Post Housing Assembly.
- Fits new FLAT CAP 245W Royale Square Post.
- Unlike ROUND CAP 245W post where you feed the net cable over the live end cap's pulley and onto the reel at the front of the assembly, the FLAT CAP post is designed so that the net cable is fed directly into the pulley that sits under the flat cap, which is raised to access the pulley. The cable then goes down into the reel assembly onto the turning mechanism.
- 6 lbs.
3218W Post Cap for Live End Post. Black or Green. 4 lbs. (Not shown)
320-6W Post Cap for Dead End Post. Black or Green. 4 lbs. (Not shown) |
|
|
|
Replacement Parts for 2-7/8" Round Posts--Reels & Reel Parts
218W External Wind Deluxe Heavy Duty Reel Assembly with Removable Handle. Steel. Black or Green. 4 lbs.
219W External Wind Deluxe Heavy Duty Reel Assembly with Removable Handle and Ratchet Guard for increased safety; aluminum. Black or Green. 4 lbs.
3207W External Wind Covered Winder [like old Ball Sampson winder] aluminum-casted, Black or Green 5 lbs.
3205W Internal Wind Post Housing Assembly for #3464W 2-7/8" post, stainless steel, 45 carbon steel worm shaft, winder held in place on both ends to keep gears aligned during winding, dipped in nickel then gold plated so will not fade or change color. U. S. Patent 7,201,677
3444W Replacement Handle Pin for 218W or 219W. 1 lb.
3445W Replacement Handle for 218W or 219W reel. Black or Green. 1 lb.
3209W Post Crank Handle. 2 lbs.
3210W External Wind Reel Assembly for 2-7/8" OD post, Black or Green, 5 lbs.
3361W Replacement Handle for 3210W Reel. Black or Green. 1 lb. |
|
|
Replacement Parts for 2-7/8" Round Posts--Other Replacement Parts
248W PVC Replacement Sleeves for 2-7/8” OD posts, 4 lbs.
3111W-2 7/8 Caps for Post Sleeves, 2-7/8” OD. Sold as pair. Extra or Replacement. 1/4 lb.
3296W Post Collar for 2-7/8” OD Post. Extra or Replacement. Black or Green, 1/2 lb.
268W Cleat for External Wind Posts (A-5 cleat). Extra or Replacement. Black or Green. 1 lb.
299AW Post Cap with Pulley for 2 7⁄8" Winder Side and Deadhead Post. Black or Green. 1 lb. |
|
